| Input Connectors |
1/4" TRS, female XLR (pin 2 hot) |
| Input Type |
Electronically balanced/unbalanced, RF filtered |
| Input Impedance |
Balanced 40 kOhm, unbalanced 20 kOhm |
| Max Input |
>+21dBu balanced or unbalanced |
| CMRR |
>40dB, typically >55dB at 1kHz |
| Output Connectors |
1/4" TRS, male XLR (pin 2 hot) |
| Output Type |
Impedance-balanced/unbalanced, RF filtered |
| Output Impedance |
Balanced 100 ohm, unbalanced 50 ohm |
| Max Output |
>+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) |
| Bandwidth |
20Hz to 20kHz, +0.5/-1dB |
| Frequency Response |
<10Hz to >50kHz, +0.5/-3dB |
| Dynamic Range |
Typically >112dB |
| Signal to Noise Ratio |
Typically >95dB |
| THD+Noise |
<0.003% |
| Interchannel Crosstalk |
<-90db, 20Hz to 20kHz |
| Bypass Switch |
Bypasses the graphic equalizer section in the signal path |
| Low cut Switch |
Activates the 50Hz 12dB/octave Bessel high-pass filter |
| Range Switch |
Selects either +/- 6dB or +/- 12dB slider boost/cut range |
| Operating Voltage |
100VAC-240VAC 50/60Hz |
| Power Consumption |
15W |
| Power Connector |
IEC receptacle |
| 设备重量 |
4.8 lbs.(2.2 kg) |
| Shipping Weight |
6.2 lbs.(2.8kg) |
| Dimensions |
1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W |